The Flyxii FR-701 is a 29+ carbon frame designed for a 100mm travel fork (axle to crown 506 mm with 51 mm offset). Here are more details about the frame.
A noticeable feature is the two positions for the 12x148 rear axle. The difference between the two positions is about 15 mm. This allows you to choose between shorter and longer chainstay length and wheelbase.
(rear derailleur hanger mounts)
Supported wheel sizes are up to 29x3.25 (as stated).
A tapered (1 1/8" - 1.5") integrated headset is used.
The bottom bracket is "BB92" (press-fit 41mm x 92mm) compatible.
The seatpost has a diameter of 31.9 mm and a 37 mm clamp.
The rear brake mount is Flat Mount.
And it is for the "shorter" axle position. In my opinion, the Flat Mount is a good choice for a carbon frame. There are just two holes without thread. If you use a Post Mount brake, the bolts will screw into an adapter.
There are only two water bottle cage mounts, they are on the downtube.
My 19" (L) frame weighs 1340 g without anything attached to it (just frame).
Stated geometry:
According to my measurements, the stated wheelbase (WB) and chainstay length (RC) correspond to the "shorter" axle position.
0 comments:
Post a Comment